Affinity study of novel gelatin cell carriers for fibronectin

In the present work, the gelatin/fibronectin affinity was evaluated using SPR, QCM and radiolabelling. The results indicate that type A gelatin films possess a higher affinity for Fn compared to type B gelatin. This is due to a combined hydrophobic and electrostatic interaction between gelatin type A and Fn. In a second part, the affinity of Fn for porous gelatin scaffolds was evaluated. The scaffolds were prepared by a cryogenic treatment and subsequent freeze-drying yielding type I and type II scaffolds which possess different pore geometries/sizes. The results indicate that the Fn density on the scaffolds can be fine-tuned by varying the Fn concentration, the gelatin type (A vs. 13), the pore size/geometry (type I vs. type II scaffolds)

Nonthermal Plasma Technology as a Versatile Strategy for Polymeric Biomaterials Surface Modification: A Review

In modern technology, there is a constant need to solve very complex problems and to fine-tune existing solutions. This is definitely the case in modern medicine with emerging fields such as regenerative medicine and tissue engineering. The problems, which are studied in these fields, set very high demands on the applied materials. In most cases, it is impossible to find a single material that meets all demands such as biocompatibility, mechanical strength, biodegradability (if required), and promotion of cell-adhesion, proliferation, and differentiation. A common strategy to circumvent this problem is the application of composite materials, which combine the properties of the different constituents. Another possible strategy is to selectively modify the surface of a material using different modification techniques. In the past decade, the use of nonthermal plasmas for selective surface modification has been a rapidly growing research field. This will be the highlight of this review. In a first part of this paper, a general introduction in the field of surface engineering will be given. Thereafter, we will focus on plasma-based strategies for surface modification. The purpose of the present review is twofold. First, we wish to provide a tutorial-type review that allows a fast introduction for researchers into the field. Second, we aim to give a comprehensive overview of recent work on surface modification of polymeric biomaterials, with a focus on plasma-based strategies. Some recent trends will be exemplified. On the basis of this literature study, we will conclude with some future trends for research

Effect of cryogenic treatment on the rheological properties of gelatin hydrogels

Gelatin has the ability to form a gel when cooled below the sol-gel temperature. In this study, the effects of various cryo-parameters, including the number of freeze-thaw cycles, cooling rate, thawing rate, and gelatin concentration, on the material properties were examined. The rheological properties of the cryogels improved with increasing cryo-cycles and decreasing cooling and thawing rates as well as were superior to those of the corresponding hydrogels formed at room temperature. In addition, the critical gelation concentration decreased after repeated cryo-treatments. Methacrylamide-modified gelatin was also treated cryogenically, followed by in situ UV irradiation to enable radical cross-linking. The cross-linking efficiency of specific gelatin concentrations improved with freeze-thawing. Cryogelation can be used to fine-tune the mechanical properties of hydrogels. This is of relevance to tissue engineering where porous gelatin hydrogels are used as biomaterials

Surface functionalized titanium scaffolds for orthopaedic application: learning from nature

C

Surface treatment of a polypropylene film with a nitrogen DBD at medium pressure

Surface treatment of polymer films is usually necessary to improve surface wetting and adhesion characteristics. Traditional liquid chemical processes have several disadvantages in contrast to dry finishing processes, like plasma technology. Dielectric barrier discharges at atmospheric pressure are extensively studied for surface treatment, however, almost no research has been done on surface treatment with a dielectric barrier discharge at medium pressure. Therefore, in this paper, a polypropylene (PP) film is plasma-treated with a dielectric barrier discharge (DBD) in nitrogen at medium pressure (5.0 kPa). The surface properties of the plasma-treated samples are examined using contact angle measurements, X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Results show that the surface wettability is significantly enhanced after plasma treatment. The incorporation of nitrogen on the surface is significant (10 at%), demonstrating the ability of the used DBD set-up to generate nitrogen-containing functional groups on the PP surface. Nevertheless, a considerable amount of oxygen (10 at%) is incorporated onto the PP surface underlining the extreme reactivity of oxygen active species and the difficulty in overcoming the air contamination problem. Moreover, AFM analysis reveals that the nitrogen plasma creates large changes in the surface morphology of the PP film due to the selective etching of the amorphous regions of the polymer film

Candida albicans biofilm formation on peptide functionalized polydimethylsiloxane

In order to prevent biofilm formation by Candida albicans, several cationic peptides were covalently bound to polydimethylsiloxane (PDMS). The salivary peptide histatin 5 and two synthetic variants (Dhvar 4 and Dhvar 5) were used to prepare peptide functionalized PDMS using 4-azido-2,3,5,6-tetrafluoro-benzoic acid (AFB) as an interlinkage molecule. In addition, polylysine-, polyarginine-, and polyhistidine-PDMS surfaces were prepared. Dhvar 4 functionalized PDMS yielded the highest reduction of the number of C. albicans biofilm cells in the Modified Robbins Device. Amino acid analysis demonstrated that the amount of peptide immobilized on the modified disks was in the nanomole range. Poly-d-lysine PDMS, in particular the homopeptides with low molecular weight (2500 and 9600) showed the highest activity against C. albicans biofilms, with reductions of 93% and 91%, respectively. The results indicate that the reductions are peptide dependent